Pol-108 c/ Itturin, 26. 20100 Lezo (Guipúzcoa) SPAIN
Tfn. 0034-943491837 Fax 0034-943491975
|
|
Pol-108 c/ Itturin, 26. 20100 Lezo (Guipúzcoa) SPAIN Tfn. 0034-943491837 Fax 0034-943491975 |
|
|
Motor operated guillotina shears "Durma"
ERMAKSAN mod. 3106
 |
Swinging top beam on high-precision and self aligning roller bearings. |
Main technical characteristics: | ||
|
Accurate adjustment system for blades. | |||
|
Modern and silent hydraulic system conforming to safety norms. (BOSH, PARKER ...) |
Cutting
capacity:
Main motor: Stroke per minute: Down holders: Back gauge: Dimension: Weight: |
3.100
x 6 mm
15 HP 13 16 650 mm 3895 x 1950 x 1550 mm 5.500 Kg |
|
|
Hydraulic pressure safety system. | |||
|
Grounded and chrome covered hydraulic pistons. |
|||
|
Electrical system conforming to International safety standards. (Telemecanique - Siemens) |
|||
|
Emergency stop buttons. | |||
|
Rapid cuttings of short pieces by electrical stroke adjustment system. |
|||
|
Motorised back gauge with electronic digital read out. |
|||
|
Digital counter. | |||
|
Read Slide. | |||
|
T-slots on the squaring arm and on the support arm. |
|||
|
Table with ball transfers. | |||
|
Abrasion resistant blades; top blade: 2 axes and buttom blade: 4 axes. |
|||
|
Lightening of cutting line. | |||
|
Rear and side guards. | |||
|
Finger guards. | |||
|
Photocell on the rear guards. | |||
MOTOR OPERATED GUILLOTINA SHEARS "DURMA"
|
MODEL |
CAPACITY |
|
|
| RGM 1303 | 1350 x 3 mm | ||
| RGM 2003 | 2050 x 3 mm | ||
| RGM 2525 | 2550 x 2,5 mm | ||
| RGM 3002 | 3100 x 2 mm | ||
| # RGM 2004 | 2050 x 4 mm | ||
| # RGM 2505 | 2550 x 4 mm | ||
| # RGM 3004 | 3100 x 4 mm |
The all range of the RGM serie is provided with movable pedal switch and cutting motion by a gear brake motor.
The shears with " # " have motorized back gauge from 5 to 750 mm, electronic display, adjuste wheel and movable table to adjust the cutting width. In the other machines the back gauge is manual ( 500 mm ).
